中文简体
英语
西班牙语
德语
CT-250S/CT-250V Manual Cut-Off Machine
CT-250S/CT-250V is a manual cut-off machine, which designed according to the principles of safety an...
Metallurgical polishing cloths are made from fine materials designed to clean metal parts. Ideally, these cloths are meant for use on plated metals, including gold, silver, and nickel. The best thing about these cloths is that they can be used dry without using cleaners. They are a fast and easy way to keep your metal parts looking their best.
When you're shopping for metallurgical polishing cloths, you might be confused by the terms Dacron and polyester. These materials are both polyester but have specific qualities that make them better for certain applications. Dacron is a polyester fabric, but the fibers it's made from are different.
The Dacron fabric is made from a special type of polyester called polyester. It's made of a blend of monomers linked by polymerization. It's durable, hypoallergenic, and doesn't gather static electricity. In addition to being a good choice for polishing cloths, Dacron is highly versatile. Dacron is easy to clean, light, and moisture-wicking, making it a favorite among industrial users.
The most important aspect of a metallurgical polishing cloth is its lubricant. Different polishing cloths have different lubricants. One type is called diamond extender. Another one is called lapping oil. You can choose any of these depending on the material you are polishing. A good lubricant is one that can provide long-lasting results.
Different lubricants have different viscosity and should be used according to the material and preparation step. For example, for fine grinding of hard materials, a low-viscosity, thin-film lubricant is used. For soft materials, use a yellow or red lubricant. Water-sensitive materials should use blue lubricant.
Different materials require different lubricants. The choice of lubricant depends on the type of material to be prepared and the preparation step. Lubricants are selected based on the preparation step and the material to be prepared. For fine grinding of hard materials, a thin and low-viscosity lubricant is preferred to obtain high removal rates and short preparation times. On the other hand, yellow and red metallurgical polishing cloths are suitable for fine polishing of soft materials. Blue and red lubricants are suitable for water-sensitive materials.
.jpg?imageView2/2/w/400/format/jpg/q/75 "Cut Off Wheels")
.jpg?imageView2/2/w/400/format/jpg/q/75 "AO-P Alumina Suspension")
