Custom MT-1H Mounting Press Manufacturers, Factory - Trojan (Suzhou) material technology Co., Ltd.

MT-1H Mounting Press

Product Description

MT-1H is a single-sleeve semi-automatic hot mounting machine with a7-inch touch screen and an easy-to operate interface. lt adoptshydraulic pressurization method and is suitable for thermoforming ofdifferent materials, such as epoxy resin, bakelite powder, acrylicpowder, etc.lt has the characteristics of strong applicability, highefficiency and good quality.

Features

1.7-inch touch screen, simple and easy to understand operation interface;

2.15 groups of commonly used programs can be saved, heating power can be set, realtime display of change curve intemperature and pressure;

3.The cooling temperature or cooling time can be used as the end condition;

4.The bottom is equipped with a collection tank;

5.Horizontal push-pull sliding cover makes locking easier and more convenient;

6.Heating overload protection against overheating;

7.Quickly replaceable sleeves for more fexible use.

Technical Parameters

	MT-1H
Power supply	220V, 1P, 2.5 Kw, 15A
Heating Power	2.0KW
Heating control	Power can be set (10-100%)
Sample size	Φ30mm( Standard), Φ25.4, Φ32, Φ40, Φ50mm(Optional)
Heating Range	100-200˚C
Holding Time	0 ~ 99min
Max.Pressure	0 - 500Bar ( Depends on cylinder size )
Heating Position	Surrounded
Cooling Mode	Automatic mode: by time/temperature; manual mode
Cooling Rate	High, medium and low cooling rate
Control Panel	7-inch touch screen
Water inlet	OD=Φ8mm connecter，pressure<0.3MPa
Water outlet	OD=Φ12mm connecter
Environment Temperature	-20˚C - 60˚C
Environment Humidity	0-95%RH
*Dimension (WDH)*	400509537mm
Weight	48kg